Flat rack container: sizes, types and what it carries
A flat rack container is a container stripped to its floor and two end walls, with no roof and no sides: machinery, vehicles, pipes, transformers and anything too wide or tall for a box is chained onto it from the side or from above. The 40 ft version (40 FR) offers a deck of about 11,657 × 2,298 mm and typically takes about 40 tonnes; a 20 ft one, 5,634 × 2,194 mm.
Updated 17 Nov 2026
What goes on a flat rack
Anything no box can hold: excavators and tractors, generators and transformers, boats, steel pipes and girders, whole sections of a plant. Chains and straps tie the load to lashing rings along the side rails, and it may stick out past the sides or above the end walls. A flat rack is made to carry a heavy load on a small footprint, which a closed box of the same length could not.
Flat rack container dimensions and specifications
Dimensions of a 40 ft flat rack container (40 FR)
| 40 ft flat rack | mm | cm | ft and in | m |
|---|---|---|---|---|
| Length, outside | 12,192 mm | 1,219.2 cm | 40′ | 12.19 m |
| Width, outside | 2,438 mm | 243.8 cm | 8′ | 2.44 m |
| Height, outside | 2,591 mm | 259.1 cm | 8′ 6″ | 2.59 m |
| Length of deck, wall to wall | 11,657 mm | 1,165.7 cm | 38′ 3″ | 11.66 m |
| Width of deck | 2,298 mm | 229.8 cm | 7′ 6½″ | 2.30 m |
| End walls, height above deck | 1,955 mm | 195.5 cm | 6′ 5″ | 1.96 m |
| Deck, height above ground | 636 mm | 63.6 cm | 2′ 1″ | 0.64 m |
| Area of deck | 26.8 m² (288 sq ft) | |||
| Tare (empty) | 5,025 kg (sheets: 4,900–6,200 kg) | |||
| Typical payload | 40,075 kg (≈ 40 t) | |||
| Gross rating | 45,000 or 52,500 kg, varying by rack | |||
Figures: median of 4 data sheets (CMA CGM, Evergreen, ONE and ZIM), read on 20 October 2026; imperial sizes rounded to ½ inch. Each rack shows its own tare and gross rating in its markings; the higher the rating, the bigger the payload (rating less tare).
Dimensions of a 20 ft flat rack
| 20 ft flat rack | mm | cm | ft and in | m |
|---|---|---|---|---|
| Length, outside | 6,058 mm | 605.8 cm | 19′ 10½″ | 6.06 m |
| Width, outside | 2,438 mm | 243.8 cm | 8′ | 2.44 m |
| Height, outside | 2,591 mm | 259.1 cm | 8′ 6″ | 2.59 m |
| Length of deck, wall to wall | 5,634 mm | 563.4 cm | 18′ 6″ | 5.63 m |
| Width of deck | 2,194 mm | 219.4 cm | 7′ 2½″ | 2.19 m |
| End walls, height above deck | 2,213 mm | 221.3 cm | 7′ 3″ | 2.21 m |
| Deck, height above ground | 378 mm | 37.8 cm | 1′ 3″ | 0.38 m |
| Area of deck | 12.4 m² (133 sq ft) | |||
| Tare (empty) | 2,890 kg (sheets: 2,750–3,100 kg) | |||
| Typical payload | 31,250 kg (≈ 31 t) | |||
| Gross rating | 34,000, 38,100 or 45,000 kg, varying by rack | |||
Figures: median of 5 data sheets (CMA CGM, Evergreen, Hapag-Lloyd, ONE and ZIM), read on 20 October 2026; imperial sizes rounded to ½ inch. Each rack shows its own tare and gross rating in its markings; the higher the rating, the bigger the payload (rating less tare).
40 ft high cube flat rack
| 40 ft high cube flat rack | mm | cm | ft and in | m |
|---|---|---|---|---|
| Length, outside | 12,192 mm | 1,219.2 cm | 40′ | 12.19 m |
| Width, outside | 2,438 mm | 243.8 cm | 8′ | 2.44 m |
| Height, outside | 2,896 mm | 289.6 cm | 9′ 6″ | 2.90 m |
| Length of deck, wall to wall | 11,652 mm | 1,165.2 cm | 38′ 2½″ | 11.65 m |
| Width of deck | 2,374 mm | 237.4 cm | 7′ 9½″ | 2.37 m |
| End walls, height above deck | 2,264 mm | 226.4 cm | 7′ 5″ | 2.26 m |
| Deck, height above ground | 632 mm | 63.2 cm | 2′ 1″ | 0.63 m |
| Area of deck | 27.7 m² (298 sq ft) | |||
| Tare (empty) | 5,300 kg (sheets: 5,000–6,250 kg) | |||
| Typical payload | 47,300 kg (≈ 47 t) | |||
| Gross rating | 50,000, 52,500, 55,000 or 58,600 kg, varying by rack | |||
Figures: median of 5 data sheets (Evergreen, Hapag-Lloyd, Maersk, ONE and ZIM), read on 20 October 2026; imperial sizes rounded to ½ inch. Each rack shows its own tare and gross rating in its markings; the higher the rating, the bigger the payload (rating less tare).
With its walls raised, the high cube rack is 2,896 mm tall, and its walls stand 2,264 mm above the deck, where a standard 40 ft rack’s stand 1,955 mm. It is rated for heavier loads too, up to 50,000, 52,500, 55,000 or 58,600 kg gross on our sheets.
Racks differ between makers more than closed boxes do, since end walls, corner posts and floors are built in different ways: a 40 ft rack weighs anything from 4,900 to 6,200 kg empty on our sheets. Get the data sheet of the rack on offer before planning a load to the centimetre.
Weight and payload
Floor and side rails alone carry the load, so a flat rack outweighs a closed box of its length: about 5,025 kg empty for a 40 ft (range 4,900–6,200 kg) and 2,890 kg for a 20 ft. It carries more in return, depending on its gross rating:
| Rack | Gross rating | Load it can take |
|---|---|---|
| 40 ft | 45,000 kg | about 40 tonnes |
| 40 ft | 52,500 kg | about 47 tonnes |
| 20 ft | 34,000 kg | about 31 tonnes |
| 20 ft | 45,000 kg | up to about 42 tonnes |
Each rack carries its own figures on its markings, and its maximum gross also on its CSC plate; payload is maximum gross less tare.
Never let a heavy, compact machine bear on just a few planks: lay timber bearers crosswise so the weight reaches the steel cross-members, following the lashing plan drawn up by the line or a surveyor.
Fixed or collapsible flat rack container?
| Type | Code | What to know |
|---|---|---|
| Fixed end walls | 42P1, 22P1 | robust and simple; empty, it still occupies a full slot |
| Collapsible end walls | 42P3, 22P3 | walls fold onto the deck, so empties travel stacked, several to a slot, and return cheaper. Before buying, fold the walls down and raise them again: hinges and locking pins seize on a rack left idle |
| Platform | a bare deck without end walls, for the longest loads | |
| High cube flat rack | taller walls and a higher rating, offered by some lines for tall, heavy cargo (sizes above) |
How tall is a flat rack?
| 40 ft rack | 20 ft rack | |
|---|---|---|
| Outside, walls up | 2,591 mm, like a standard box | 2,591 mm |
| Walls above the deck | 1,955 mm | 2,213 mm |
| Deck above the ground | about 636 mm | about 378 mm |
Medians of our data sheets. The 40 ft rack’s walls are lower because its deck is thicker. For comparison, Hapag-Lloyd’s deck heights: 648 mm on its 40 ft high cube rack, 370 mm on its 20 ft.
In gauge or out of gauge
Within the rack’s 2,438 mm width and below the tops of its end walls, cargo is in gauge and stows as an ordinary box would. Anything wider or taller is out of gauge: the line has to agree beforehand, it may take up the slots of the containers next to or above it on board, hence a higher price, and on Indian roads it can count as over-dimensional cargo (ODC). Even with the load in gauge, the vehicle carrying the rack may stand no taller than 4.52 m in India, deck included. To find the tallest machine that keeps within that, take your trailer’s deck height and the rack’s own deck, about 636 mm above the ground on a 40 ft, away from 4.52 m.
Flat rack, open top or open side?
The flat rack takes loads too wide for any box, but leaves them in the weather. When the load is narrow enough for a box, two drier options exist: lowered by crane into an open top, it travels under a tarpaulin; pushed in sideways by forklift, an open side keeps it under steel.
Buying a flat rack in India
- One shipment: hire the rack from the shipping line along with the freight; buying is rarely worth it.
- When to buy: loads leaving your site repeatedly, a rack used as a platform, or shipping it as a shipper-owned container (SOC).
- Prices: few racks are listed with a price. For a 40 ft flat rack, the 15 November 2026 reading found 2 sellers asking ₹2,50,000 to ₹2,70,000. The 20 ft flat rack page has its latest figures, or an estimate if no one lists it. Container Bhav sells no racks; both pages pass requests to partner sellers who can quote.
40 FR and the 20 ft rack: quick answers
What does 40 FR mean?
A 40 ft flat rack: “FR” is shipping lines’ shorthand in their equipment lists. The size-type code painted on it is usually 42P1 (fixed end walls) or 42P3 (folding end walls); a 20 ft rack reads 22P1 or 22P3.
How big is a 20 ft flat rack?
Walls raised, 19′ 10½″ × 8′ × 8′ 6″ (6,058 × 2,438 × 2,591 mm) overall on our data sheets; the deck between the walls is about 18′ 6″ × 7′ 2½″ (5,634 × 2,194 mm).
Flat rack prices and other types
Published 17 November 2026. Sizes and weights: the data sheets cited under each table, read on 20 October 2026. Prices: marketplace asking prices read on 15 November 2026; listings with an exact price read on 20 October 2026.