Half height container: sizes, cargo and offshore models
A half height container stands roughly half as tall as a standard box, 1,295 mm (4 ft 3 in) against 2,591 mm (8 ft 6 in), on the usual 20 ft length and 8 ft width. Built as a low open top, it is meant for heavy bulk (ores, mineral concentrates, scrap) that hits a box's weight limit long before the space runs out, and fills from above once its steel lid is lifted or its tarpaulin rolled back. Offshore half heights, around 1,280 mm tall, are a separate family: certified open boxes that ride between supply vessels and oil platforms, lifted by their own slings. None turned up in our price readings.
Updated 17 Nov 2026
Half height container dimensions (20 ft), in mm and metres
| Model | ISO, steel lid | ISO, open, no roof | ISO, tarpaulin | Offshore |
|---|---|---|---|---|
| Outside, length × width × height | 6,058 × 2,438 × 1,295 mm | 6,058 × 2,438 × 1,295 mm | 6,058 × 2,438 × 1,219 mm | 6,058 × 2,438 × 1,280.5 mm |
| The same in metres | 6.06 × 2.44 × 1.30 m | 6.06 × 2.44 × 1.30 m | 6.06 × 2.44 × 1.22 m | 6.06 × 2.44 × 1.28 m |
| Inside, length × width × height | 5,898 × 2,350 × 1,097 mm | 5,911 × 2,322 × 985 mm | 5,898 × 2,350 × 1,016 mm | 5,862 × 2,200 × 945.5 mm |
| Capacity | 15.2 m³ | 13.5 m³ | 14.1 m³ | about 12 m³ |
| Tare | 2,245 kg | 2,550 kg | 1,920 kg | 2,570 kg |
| Load it may carry | 21,755 kg | about 36,000 kg | 22,072 kg | 10,000 kg |
| Gross rating | 24,000 kg | 38,560 kg | 24,000 kg | 12,570 kg |
| How it opens | from the top; the steel lid lifts off | from the top; a hatch where doors would be | from the top under bows and tarpaulin, plus a gate at the rear | from the top and through a side that comes off; covered by a net or tarpaulin |
Steel lid and tarpaulin models: data sheets of an American maker. Open model: a German maker and lessor, whose rating exceeds ISO 668's 36,000 kg; its sheet gives two payloads (36,010 and 30,160 kg), so ours is gross less tare. Offshore: a British offshore lessor's sheet of November 2023, with the volume worked out by us from the inside sizes. The plate on each box has its own figures.
Only the height is new. The footprint, 20 ft by 8 ft, is that of any 20 ft container, so cranes, stacks and trailers handle a half height as they handle a full box, and two ISO half heights on top of each other stand 8 ft 6 in, as tall as one standard box. Full heights, 2,591 mm on a standard 40 ft and 2,896 mm on a high cube, are on 40 feet container size.
Half heights in 10 ft and 40 ft
Those we found are offshore boxes, from the same lessor:
| 10 ft offshore half height | 40 ft offshore half height | |
|---|---|---|
| Outside | 2,991 × 2,438 × 1,280.5 mm | 12,192 × 2,438 × 1,280.5 mm |
| Inside | 2,795 × 2,200 × 1,007.5 mm, about 6.2 m³ by our count | not given on the sheet |
| Tare | 1,380 kg | 4,970 kg |
| Gross rating | 9,320 kg | 25,000 kg |
No data sheet for a 40 ft ISO half height turned up.
What a half height is for
Cargo so dense it runs out of weight allowance before space. A standard 20 ft takes about 28,260 kg in 33.2 m³, so anything heavier than about 0.85 tonne per m³ hits the weight limit first, and anything above 1.7 tonnes per m³ leaves the box half empty. The American steel-lid half height, 21,755 kg in 15.2 m³, is full by both measures at about 1.4 tonnes per m³. With its low sides it fills from above and empties by tipping, and nobody has to work inside a tall box. Makers and users we read list scrap metal, salt, mineral sands, iron ore, and concentrates of copper or zinc.
| Step | How |
|---|---|
| Filling | by crane from above, with the lid lifted or the tarpaulin rolled back; the tarpaulin model also has a rear gate |
| Emptying | tipped at an end or a side, or turned upside down in a rotator. Australian mines use a 1,450 mm version with a watertight steel lid for mineral sands, salt, iron ore and concentrates, and one rotator there lifts the lid by itself before turning the box over |
Heavy items that are not loose, such as machines or steel, are usually easier to load and secure in a full-height open top or on a flat rack.
The ISO code of a half height
The height of an 8 ft wide box is coded in the second character of its size-type code: 8 for 1,295 mm (4 ft 3 in), 9 for 1,219 mm or less. The type letters are an open top’s: U1 for removable top members and, since ISO 6346’s 2022 edition, U6 for a removable hard top. A 20 ft half height therefore usually reads 28U1, a new steel-lid box may read 28U6, and the 1,219 mm tarpaulin box 29U1. ISO 668, the size standard, calls it a 1CX: 20 ft long and lower than 8 ft.
Offshore half heights (DNV)
Offshore half heights work between supply vessels and oil, gas or wind platforms, carrying pipes, tools, chains and other kit. Their design and certificate follow the offshore container rules, DNV-ST-E271 (the former DNV 2.7-1) or EN ISO 10855, the successor of EN 12079.
| Rule | What it requires |
|---|---|
| Lifting | at sea, through pad eyes and a certified set of slings; the corner fittings are not used for lifting; one classification society’s guide limits offshore containers to 25,000 kg gross |
| Inspection | visually at least once every 12 months; every 48 months, either a non-destructive test plus a visual check, or a load test. The slings run on the same schedule, the plate on the box carries the last inspection date, and a box past that date is kept out of offshore work until it has been inspected |
| Markings | maximum gross, tare and payload, in characters 50 mm high or more |
Ratings differ by model; a second supplier offers 20 ft offshore half heights rated roughly 12,400–19,400 kg gross. One Indian buyer is on record: in 2015 a Goa institute of the Ministry of Earth Sciences, then the National Centre for Antarctic and Ocean Research and today NCPOR, tendered for eight 6 m half heights approved to DNV 2.7-1 and EN 12079: 1,453 mm high, above the lessor’s 1,280 mm, with 9,700 kg of payload, an end door and a DNV-certified four-leg sling. Neither the Oil Industry Safety Directorate, nor the shipping or hydrocarbons directorates general, nor ONGC has published a requirement on offshore containers that we could find: the operator you supply will tell you which standard it accepts.
Finding a half height in India
Ports, CONCOR and the railways: none of the public sources we read shows an ISO half height working in India. The nearest thing, Indian Railways’ trial of top-loaded 25 tonne hoppers for coal and ore, is a different design. Our price readings had no half height either, and no Indian price for one turned up.
To ask for one anyway, use the button below and say two things: the size, and whether the job is bulk cargo in an ISO box or offshore work that needs a certified box. Partner sellers covering your PIN code answer with a delivered price if they can supply it.
Request a half height container quote →
What does a “half-size” container cost?
Which half? Halve a 20 ft along its length and you have a 10 ft box: on 15 November 2026, 6 sellers asked ₹1,05,000 to ₹2,90,000 for a used 10 ft container. Halve a 40 ft and you have a 20 ft: used ones were listed from ₹1,00,000, a price one seller in four matched or undercut (20 ft container price). Halve the height and you have the box on this page, for which we found no price.
Other types, and prices
Published 17 November 2026. Sizes and weights: data sheets from two makers of ISO half heights and one offshore lessor, and a 2015 public tender. Type codes: the ISO 6346 register. Offshore rules: a classification society's 2020 guide. Trade press articles (2019, 2023). All read on 23 October 2026. Prices: asking prices read on 15 November 2026.